Journal: Polymers

Article Title: Modeling and Analysis of Morphology of Injection Molding Polypropylene Parts Induced by In-Mold Annealing

doi: 10.3390/polym14235245

Figure Lengend Snippet: Temperature evolution for cases S ( a ) and 413_FA ( b ) as recorded during the injection molding test (T rec ) and calculated by Moldflow simulations (T MF ) at the cavity surface.

Article Snippet: Moldflow software (Moldflow 2018, Autodesk Inc., San Rafael, CA, US) was adopted for the simulations of the injection molding process in the conditions reported in with the main purpose of describing shear rate and temperature distributions along the cavity thickness at several positions along the flow path.

Techniques: Injection

Journal: Polymers

Article Title: Modeling and Analysis of Morphology of Injection Molding Polypropylene Parts Induced by In-Mold Annealing

doi: 10.3390/polym14235245

Figure Lengend Snippet: Temperature, shear rate, molecular stretch, and crystallinity evolutions for case 413_FA at 0.465 ( a – c ) and 0.06 ( b – d ) normalized distances from the midplane 10 mm from the gate. Crystallinity predictions calculated by Moldflow are also shown in ( d ) as the blue line.

Article Snippet: Moldflow software (Moldflow 2018, Autodesk Inc., San Rafael, CA, US) was adopted for the simulations of the injection molding process in the conditions reported in with the main purpose of describing shear rate and temperature distributions along the cavity thickness at several positions along the flow path.

Techniques: Shear

Journal: Polymers

Article Title: Modeling and Analysis of Morphology of Injection Molding Polypropylene Parts Induced by In-Mold Annealing

doi: 10.3390/polym14235245

Figure Lengend Snippet: Temperature, shear rate, molecular stretch, and crystallinity evolutions for case 433_FA at 0.5 ( a – c ) and 0.06 ( b – d ) normalized distances from the midplane at 10 mm from the gate. Crystallinity predictions calculated by Moldflow are also shown in ( d ) as the blue line.

Article Snippet: Moldflow software (Moldflow 2018, Autodesk Inc., San Rafael, CA, US) was adopted for the simulations of the injection molding process in the conditions reported in with the main purpose of describing shear rate and temperature distributions along the cavity thickness at several positions along the flow path.

Techniques: Shear

Journal: Polymers

Article Title: Modeling and Analysis of Morphology of Injection Molding Polypropylene Parts Induced by In-Mold Annealing

doi: 10.3390/polym14235245

Figure Lengend Snippet: Comparison between ( a ) temperature and ( b ) crystallinity evolutions calculated by Moldflow simulations and by the model at 0.06 normalized distance from the midplane for the cases 413_SA and 433_SA.

Article Snippet: Moldflow software (Moldflow 2018, Autodesk Inc., San Rafael, CA, US) was adopted for the simulations of the injection molding process in the conditions reported in with the main purpose of describing shear rate and temperature distributions along the cavity thickness at several positions along the flow path.

Techniques: Comparison

Journal: Polymers

Article Title: Modeling and Analysis of Morphology of Injection Molding Polypropylene Parts Induced by In-Mold Annealing

doi: 10.3390/polym14235245

Figure Lengend Snippet: Spherulitic average radii measured from SEM analyses (R exp ), obtained from Moldflow simulations (R MF ), and radii calculated adopting the model reported in this work (R calc ).

Article Snippet: Moldflow software (Moldflow 2018, Autodesk Inc., San Rafael, CA, US) was adopted for the simulations of the injection molding process in the conditions reported in with the main purpose of describing shear rate and temperature distributions along the cavity thickness at several positions along the flow path.

Techniques: